RAACSCORP

Build-To-Suit (BTS) Project Scope

RAACSCORP Build-To-Suit (BTS) project involves the planning, design, construction, and delivery of a facility customized to meet the specific operational requirements of a client or tenant

Project :Build-To-Suit Development

Location :Santa Maria, Pangasinan

Scope Title:Civil, Structural, and Electrical Works

RAACS Corp delivered a comprehensive Build-To-Suit scope in Sta. Maria, Pangasinan, covering site preparation, excavation, dewatering, reinforced concrete works, backfilling, structural erection, and final quality testing. The project included clearing and layout, rebar installation, formworks, concrete placement, electrical testing, torque testing, and verticality inspection to ensure safe, accurate, and standards-compliant execution.This BTS project demonstrates RAACS Corp’s capability to manage critical civil, structural, and technical works from ground preparation through final verification, supporting dependable project delivery for client-specific infrastructure requirements.

1. Site Clearing and Layout Works

➤ Clear the project area of debris, vegetation, obstructions, and unsuitable materials
➤ Establish project boundaries, gridlines, elevations, and reference points.
➤ Conduct site layout and staking based on approved construction drawings.

2. Excavation Works

➤ Excavate foundations, trenches, pits, and other required areas to the specified lines, grades, and depths.
➤ Provide proper protection, shoring, and access where required.
➤ Dispose of excess or unsuitable excavated materials as directed.

3. Dewatering Works

➤ Provide dewatering equipment and systems as necessary to maintain dry and workable excavation areas.
➤ Control groundwater, rainwater, and surface runoff during construction.
➤ Ensure dewatering activities do not damage adjacent structures, utilities, or work areas.

4. Rebar Works

➤ Supply, cut, bend, fabricate, and install reinforcing steel bars according to approved plans and bar bending schedules.
➤ Provide proper spacing, supports, chairs, ties, laps, and concrete cover.
➤ Secure inspection approval prior to concrete pouring.

5. FormWorks

➤ Fabricate and install formworks for foundations, columns, beams, slabs, pedestals, and other concrete elements
➤ Ensure formworks are properly aligned, braced, sealed, and capable of supporting fresh concrete loads.
➤ Remove forms only after concrete has achieved sufficient strength.

6. Concrete Works

➤ Place, vibrate, finish, and cure concrete in accordance with approved specifications.
➤ Coordinate concrete delivery, pouring sequence, slump testing, and sampling as required.
➤ Protect freshly placed concrete from damage, contamination, and premature drying.

7. Backfilling & Compaction Works

➤ Backfill excavated areas using approved suitable materials
➤ Place backfill in layers and compact to the required density.
➤ Restore grades and prepare surfaces for succeeding works.

8. Erection Works

➤ Perform erection of structural components, supports, frames, equipment supports, or related assemblies as shown in approved drawings.
➤ Ensure proper alignment, fit-up, anchoring, bolting, and stability during installation.
➤ Provide lifting equipment, rigging, and safety controls as required.

9. Electrical Testing

➤ Conduct required electrical inspection and testing for installed electrical components and systems.
➤ Verify continuity, insulation resistance, grounding, polarity, and other applicable test requirements.
➤ Submit test results and reports for review and acceptance.

10. Torque Testing

➤ Perform torque testing on bolts, anchors, and critical connections as required by project specifications.
➤ Rectify loose or non-compliant connections prior to final acceptance.
➤ Rectify loose or non-compliant connections prior to final acceptance

(BTS)